CAPS Universe documentation
1.0.4
All you need to know to be successful
|
This printer driver supports various devices from the Samsung ML series of monochrome laser printers. These devices are so called GDI printers. They accept already rasterized grapics only (like many other printers, too). Thus, the printer driver must do most of the job to prepare a document to be printable.
Supported are these ML printers, as long as they "understand" the SPL2 language. SPL is the acronym for "Samsung Printer Language" and there was a version 1 as well (e.g. SPL1). That's why the language for these printers is called SPL2 and isn't compatible with the SPL1.
Printer | Resolution | Duplex | Trays | Man. Feed | tested |
---|---|---|---|---|---|
ML1630 | |||||
ML1640 | 600/1200 | 1 | X | ||
ML2010 | |||||
ML2015 | |||||
ML2240 | 600/1200 | 1 | X | ||
ML2510 |
Theoretical some other Samsung printers accept the same SPL2 language and this printer driver can support them. Due to the absence of these printers, its untested yet. These printers are:
If you have such a printer, please test it and report if it works for you.